VFG Cleaning Felts for 16 Bore

VFG Barrel Cleaning Felts for 16 Bore Shotguns

Codes: 
Standard Felt (Box of 25) - 332051
Intensive Felt (Box of 25) - 332057

These felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod Adaptor to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean.

VFG do produce an Adaptor which fits the Parker Hale Shotgun Rod (66900), with thread size of 9/32", to convert it to a M5 thread. This M5 female thread will now allow you to fit the VFG Rod Adaptor (66804) with M5 thread which accepts the VFG Felts.

See the Complete List of VFG Calibres >>>

To be used with VFG Cleaning Rod for Shotguns

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod 
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Super Intensive Cleaners.  

Make sure that the barrel of your weapon is free after each cleaning operation.