Recknagel Weaver/Picatinny Mounts for Zeiss Rail with 45º 45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes. with Tri-Nut Fastening
Height of Base - 7mm Contents Supplied - 2x Tip-Off Mounts and Wrench Key Code Ref: 57945-0700
These Tip-off mounts are designed to be used with the Zeiss Rail Rifle Scopes with the 45º angle, especially the Zeiss Diarange. Fit to both Weaver and Picatinny Rails. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using the supplied wrench.
Fitting Tips: - Remove the two 45º Mounting Blocks from the Recknagel Mounts - Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first. - Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block. - Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn. - You are now able to slide the mount into position to suit the picatinny rail or weaver bases. - We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first. - Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.
Please Note: If these mounts are not available from stock, we will need to order them from Recknagel. Delivery will usually take 14-21 days.
