Skip to product information
1 of 5

Alan Rhone Store

Craig Klintworth No.3 Recoil Pad - Red

Craig Klintworth No.3 Recoil Pad - Red

SKU:

Regular price £139.95
Regular price Sale price £139.95
Sale Sold out
Tax included. Shipping calculated at checkout.
Looking for a Silver’s recoil pad? Craig Klintworth now makes a Silver’s copy that is indistinguishable from the original. 

Craig Klintworth's bespoke classic recoil pads will enhance the stock of even the best guns. They are supplied in two sizes No.3 and No.4 to cover all types of shotgun or rifle. The No.3 pad is more commonly used for shotgun applications, whilst the No.4, with its top nob, tends to be the most popular for rifles. Either pad is perfectly satisfactory for either application and can be left as a matter of personal preference. They are suitable for all applications and working conditions including leather covering, being both durable and climatically stable.

Pads are available in Red or Best London Orange with flat or nibbed bases. A high standard of finish is obtained by using white spirit or lamp paraffin with wet and dry polishing followed by a light coat of varnish.
This is not pre-fitted and is a Grind to fit recoil pad.

Please contact us before ordering if you have any issue regarding the fitting. We do provide a fitting service, which would involve sending us your stock or booking an appointment to have the work done. Our number is 01978 66 00 01. 

Colour: Red
Profile: Standard (Not nibbed)
Hardness: Medium
Weight (unaltered): 150g

Measurements:
Width - 47mm / 1.85"
Length - 150mm / 6"
Hole Spacing - 80mm / 3 1/8"
Depth - 22mm (tapers to 27mm at the Toe)

Installation Instructions:
Step 1
Position the pad on the butt of your stock and determine whether or not you can use the existing screw holes. If the holes match, proceed to step 2. If the holes do not match on your wood stock, then do the following: position the pad on the butt of the stock and mark the new screw holes on the gun stock butt. If the new holes are going to interfere with the old holes, then you must plug the old holes of the gun stock butt. The best way to do this is to drill out the old holes with a 1/4" drill to a depth of one inch and then cut a 1/4" dowel rod 7/8" in length and drive it into the hole. Reposition the pad on the stock, mark the location of your new screw holes, drill a 1/8" hole to a depth of one inch and screw the pad to the stock.

Step 2
While the pad is still on the stock, scribe a line on the pad plate. Remove pad from stock and position pad on a grinding jig and sand to the line you have scribed on the plate. If you do not have a jig you can "free hand" sand the pad.

Step 3
After grinding to the proper fit, radius (round) the heel, toe and sides of the pad to remove any square corners. This will make the gun easier to mount to the shoulder, give it a more attractive appearance, and prolong its life.

Step 4
Screw pad on stock. For best results: Pads with 1/8 inch holes apply a lubricant like Vaseline to the face of the pad around the mounting holes. This will help prevent marring the pad during installation of the screws. Wipe the pad clean after installation. You can use the rubber plugs to cover up the screw holes for neat finish. 

Step 5
Placing recoil pads on synthetic stocks may require professional installation by your gunsmith

View full details